Platform Edition PadBox GS — Phob Firmware Update

Follow these steps to install Phob your Platform Padbox GS :

---

1. Enter Bootloader Mode

Hold START + SELECT while plugging your Padbox into your PC.

A drive named RPI-RP2 should appear on your computer.

---

2. Flash Nuke

Copy the file Flash nuke.uf2 into the RPI-RP2 drive.
Wait a few seconds — the window will close and then reappear automatically.

3. Install Firmware

Now copy the attached file phobgcc_rp2040_platpadbox.uf2 into the same RPI-RP2 window.
After a few seconds, the controller will reboot and reconnect as a gamepad.

4. Calibration

To calibrate the analog using the Phob firmware, follow the video below:

• Calibration via Slippi (PC)
• Calibration via Nintendo Switch
  (We recommend using Hoja2 on Nintendo Switch)

Before watching the video keep in mind these button combinations:

• To enter Safe Mode, press and hold the following button combination:

• Once in Safe Mode, press and hold the following combination to begin stick calibration:

---

Download Files

• Download Flash nuke.uf2

Used to clear existing firmware before flashing the new version.

• Download phobgcc_rp2040_platpadbox.uf2

The latest Phob custom build for Padbox GS.

• Download Notched gate

The download link to the Notched gate can be found in STL files page.